[ 0.000000] Linux version 2.6.33-rc2-major (root@major) (gcc version 4.4.2 (Ubuntu 4.4.2-6ubuntu1) ) #61 SMP Sun Dec 27 16:27:32 GMT 2009 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-rc2-major root=UUID=d8314979-8ace-401c-88df-728ad6b89cb5 ro ignore_loglevel netconsole=4444@192.168.66.33/eth0,514@192.168.66.25/00:a0:d1:63:68:a6 quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7770000 (usable) [ 0.000000] BIOS-e820: 00000000c7770000 - 00000000c7780000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7780000 - 00000000c77d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c77d0000 - 00000000c77e0000 (reserved) [ 0.000000] BIOS-e820: 00000000c77eb400 - 00000000c8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 238000000 mask FF8000000 uncachable [ 0.000000] 1 base 000000000 mask E00000000 write-back [ 0.000000] 2 base 200000000 mask FC0000000 write-back [ 0.000000] 3 base 0C8000000 mask FF8000000 uncachable [ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xc7770 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000c7770000 (usable) [ 0.000000] modified: 00000000c7770000 - 00000000c7780000 (ACPI data) [ 0.000000] modified: 00000000c7780000 - 00000000c77d0000 (ACPI NVS) [ 0.000000] modified: 00000000c77d0000 - 00000000c77e0000 (reserved) [ 0.000000] modified: 00000000c77eb400 - 00000000c8000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffa00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] init_memory_mapping: 0000000000000000-00000000c7770000 [ 0.000000] 0000000000 - 00c7600000 page 2M [ 0.000000] 00c7600000 - 00c7770000 page 4k [ 0.000000] kernel direct mapping tables up to c7770000 @ 12000-18000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000 [ 0.000000] 0100000000 - 0238000000 page 2M [ 0.000000] kernel direct mapping tables up to 238000000 @ 16000-20000 [ 0.000000] RAMDISK: 3765b000 - 37fefd7b [ 0.000000] ACPI: RSDP 00000000000fa8d0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000c7770000 00048 (v01 091009 RSDT1529 20090910 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000c7770200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000c7770460 06FB2 (v01 AS252 AS252141 00000141 INTL 20051117) [ 0.000000] ACPI: FACS 00000000c7780000 00040 [ 0.000000] ACPI: APIC 00000000c7770390 0008C (v01 091009 APIC1529 20090910 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000c7770420 0003C (v01 091009 OEMMCFG 20090910 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000c7780040 00073 (v01 091009 OEMB1529 20090910 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000c777a460 00027 (v01 091009 OEMAAFT 20090910 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000c777a490 00038 (v01 091009 OEMHPET 20090910 MSFT 00000097) [ 0.000000] ACPI: GSCI 00000000c77800c0 02024 (v01 091009 GMCHSCI 20090910 MSFT 00000097) [ 0.000000] ACPI: DMAR 00000000c77820f0 000F0 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000c7784c90 00363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (12 early reservations) ==> bootmem [0000000000 - 0238000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0001000000 - 0001bb7640] TEXT DATA BSS ==> [0001000000 - 0001bb7640] [ 0.000000] #2 [003765b000 - 0037fefd7b] RAMDISK ==> [003765b000 - 0037fefd7b] [ 0.000000] #3 [0001bb8000 - 0001bb812f] BRK ==> [0001bb8000 - 0001bb812f] [ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000] [ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790] [ 0.000000] #6 [000009f800 - 00000e3dd0] BIOS reserved ==> [000009f800 - 00000e3dd0] [ 0.000000] #7 [00000e3f7c - 00000ff780] BIOS reserved ==> [00000e3f7c - 00000ff780] [ 0.000000] #8 [00000e3dd0 - 00000e3f7c] MP-table mpc ==> [00000e3dd0 - 00000e3f7c] [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] [ 0.000000] #10 [0000012000 - 0000016000] PGTABLE ==> [0000012000 - 0000016000] [ 0.000000] #11 [0000016000 - 000001b000] PGTABLE ==> [0000016000 - 000001b000] [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00238000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000c7770 [ 0.000000] 0: 0x00100000 -> 0x00238000 [ 0.000000] On node 0 totalpages: 2094847 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3820 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 798632 pages, LIFO batch:31 [ 0.000000] Normal zone: 17472 pages used for memmap [ 0.000000] Normal zone: 1260480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:36e00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880028200000 s88088 r8192 d22504 u262144 [ 0.000000] pcpu-alloc: s88088 r8192 d22504 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062932 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33-rc2-major root=UUID=d8314979-8ace-401c-88df-728ad6b89cb5 ro ignore_loglevel netconsole=4444@192.168.66.33/eth0,514@192.168.66.25/00:a0:d1:63:68:a6 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 8160364k/9306112k available (5083k kernel code, 926724k absent, 218028k reserved, 5761k data, 452k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 2799.785 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.57 BogoMIPS (lpj=11199140) [ 0.000108] Security Framework initialized [ 0.000155] Smack: Initializing. [ 0.000203] Mount-cache hash table entries: 256 [ 0.000336] CPU: Physical Processor ID: 0 [ 0.000381] CPU: Processor Core ID: 0 [ 0.000429] mce: CPU supports 9 MCE banks [ 0.000492] CPU0: Thermal monitoring enabled (TM1) [ 0.000540] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.000750] using mwait in idle threads. [ 0.000795] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.000899] ... version: 3 [ 0.000943] ... bit width: 48 [ 0.001611] ... generic registers: 4 [ 0.001655] ... value mask: 0000ffffffffffff [ 0.001702] ... max period: 000000007fffffff [ 0.001749] ... fixed-purpose events: 3 [ 0.001793] ... event mask: 000000070000000f [ 0.001851] ACPI: Core revision 20091214 [ 0.031493] Setting APIC routing to flat [ 0.031861] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071512] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05 [ 0.176224] Booting Node 0, Processors #1 [ 0.263977] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.284105] #2 [ 0.375757] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.395879] #3 [ 0.487536] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.507635] #4 [ 0.599315] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.619411] #5 [ 0.711093] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.731149] #6 [ 0.822873] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.843005] #7 Ok. [ 0.934653] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.954708] Brought up 8 CPUs [ 0.954798] Total of 8 processors activated (44799.43 BogoMIPS). [ 0.957760] NET: Registered protocol family 16 [ 0.957981] ACPI: bus type pci registered [ 0.958090] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.958154] PCI: not using MMCONFIG [ 0.958198] PCI: Using configuration type 1 for base access [ 0.960494] bio: create slab at 0 [ 0.961466] ACPI: EC: Look up EC in DSDT [ 0.965068] ACPI: Executed 1 blocks of module-level executable AML code [ 0.971069] ACPI Warning: Incorrect checksum in table [OEMB] - 7B, should be 74 (20091214/tbutils-314) [ 0.971704] ACPI: SSDT 00000000c77821e0 0244C (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.972217] ACPI: Interpreter enabled [ 0.972261] ACPI: (supports S0 S5) [ 0.972361] ACPI: Using IOAPIC for interrupt routing [ 0.972447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.976020] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.989695] ACPI: No dock devices found. [ 0.989989] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.990062] pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them [ 0.990334] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.990396] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.990457] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.990519] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.990582] pci_root PNP0A08:00: host bridge window [mem 0xc8000000-0xdfffffff] (ignored) [ 0.990646] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] (ignored) [ 0.990708] pci_bus 0000:00: scanning bus [ 0.990760] pci 0000:00:00.0: found [8086:d131] class 000600 header type 00 [ 0.990830] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x19c [ 0.990881] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.990949] pci 0000:00:03.0: found [8086:d138] class 000604 header type 01 [ 0.991011] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x19c [ 0.991060] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.991124] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.991173] pci 0000:00:03.0: PME# disabled [ 0.991230] pci 0000:00:08.0: found [8086:d155] class 000880 header type 00 [ 0.991298] pci 0000:00:08.0: calling quirk_resource_alignment+0x0/0x19c [ 0.991347] pci 0000:00:08.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.991409] pci 0000:00:08.1: found [8086:d156] class 000880 header type 00 [ 0.991476] pci 0000:00:08.1: calling quirk_resource_alignment+0x0/0x19c [ 0.991525] pci 0000:00:08.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.991588] pci 0000:00:08.2: found [8086:d157] class 000880 header type 00 [ 0.991655] pci 0000:00:08.2: calling quirk_resource_alignment+0x0/0x19c [ 0.991704] pci 0000:00:08.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.991765] pci 0000:00:08.3: found [8086:d158] class 000880 header type 00 [ 0.991832] pci 0000:00:08.3: calling quirk_resource_alignment+0x0/0x19c [ 0.991881] pci 0000:00:08.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.991944] pci 0000:00:10.0: found [8086:d150] class 000880 header type 00 [ 0.992011] pci 0000:00:10.0: calling quirk_resource_alignment+0x0/0x19c [ 0.992060] pci 0000:00:10.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.992115] pci 0000:00:10.1: found [8086:d151] class 000880 header type 00 [ 0.992182] pci 0000:00:10.1: calling quirk_resource_alignment+0x0/0x19c [ 0.992231] pci 0000:00:10.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.992306] pci 0000:00:1a.0: found [8086:3b3c] class 000c03 header type 00 [ 0.992369] pci 0000:00:1a.0: reg 10: [mem 0xfbcf6000-0xfbcf63ff] [ 0.992443] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x19c [ 0.992492] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.992560] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.992610] pci 0000:00:1a.0: PME# disabled [ 0.992672] pci 0000:00:1b.0: found [8086:3b56] class 000403 header type 00 [ 0.992730] pci 0000:00:1b.0: reg 10: [mem 0xfbcf8000-0xfbcfbfff 64bit] [ 0.992797] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x19c [ 0.992846] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.992911] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.992959] pci 0000:00:1b.0: PME# disabled [ 0.993017] pci 0000:00:1c.0: found [8086:3b42] class 000604 header type 01 [ 0.993087] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x19c [ 0.993136] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.993203] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.993252] pci 0000:00:1c.0: PME# disabled [ 0.993311] pci 0000:00:1c.1: found [8086:3b44] class 000604 header type 01 [ 0.993380] pci 0000:00:1c.1: calling quirk_resource_alignment+0x0/0x19c [ 0.993429] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.993496] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.993545] pci 0000:00:1c.1: PME# disabled [ 0.993604] pci 0000:00:1c.2: found [8086:3b46] class 000604 header type 01 [ 0.993673] pci 0000:00:1c.2: calling quirk_resource_alignment+0x0/0x19c [ 0.993723] pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.993790] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.993838] pci 0000:00:1c.2: PME# disabled [ 0.993897] pci 0000:00:1c.3: found [8086:3b48] class 000604 header type 01 [ 0.993967] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x19c [ 0.994016] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.994083] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.994204] pci 0000:00:1c.3: PME# disabled [ 0.994263] pci 0000:00:1c.4: found [8086:3b4a] class 000604 header type 01 [ 0.994333] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x19c [ 0.994382] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.994449] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.994498] pci 0000:00:1c.4: PME# disabled [ 0.994565] pci 0000:00:1d.0: found [8086:3b34] class 000c03 header type 00 [ 0.994630] pci 0000:00:1d.0: reg 10: [mem 0xfbcfc000-0xfbcfc3ff] [ 0.994704] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x19c [ 0.994753] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.994821] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.994871] pci 0000:00:1d.0: PME# disabled [ 0.994930] pci 0000:00:1e.0: found [8086:244e] class 000604 header type 01 [ 0.994997] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x19c [ 0.995046] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.995117] pci 0000:00:1f.0: found [8086:3b02] class 000601 header type 00 [ 0.995210] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x19c [ 0.995259] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.995337] pci 0000:00:1f.2: found [8086:3b20] class 000101 header type 00 [ 0.995395] pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07] [ 0.995444] pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883] [ 0.995494] pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807] [ 0.995543] pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483] [ 0.995592] pci 0000:00:1f.2: reg 20: [io 0xa400-0xa40f] [ 0.995642] pci 0000:00:1f.2: reg 24: [io 0xa080-0xa08f] [ 0.995694] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x19c [ 0.995744] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.995814] pci 0000:00:1f.3: found [8086:3b30] class 000c05 header type 00 [ 0.995872] pci 0000:00:1f.3: reg 10: [mem 0xfbcffc00-0xfbcffcff 64bit] [ 0.995930] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.995985] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x19c [ 0.996034] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.996095] pci 0000:00:1f.5: found [8086:3b26] class 000101 header type 00 [ 0.996153] pci 0000:00:1f.5: reg 10: [io 0xbc00-0xbc07] [ 0.996203] pci 0000:00:1f.5: reg 14: [io 0xb880-0xb883] [ 0.996252] pci 0000:00:1f.5: reg 18: [io 0xb800-0xb807] [ 0.996302] pci 0000:00:1f.5: reg 1c: [io 0xb480-0xb483] [ 0.996351] pci 0000:00:1f.5: reg 20: [io 0xb400-0xb40f] [ 0.996400] pci 0000:00:1f.5: reg 24: [io 0xb080-0xb08f] [ 0.996453] pci 0000:00:1f.5: calling quirk_resource_alignment+0x0/0x19c [ 0.996502] pci 0000:00:1f.5: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.996569] pci_bus 0000:00: fixups for bus [ 0.996615] pci 0000:00:03.0: scanning behind bridge, config 070700, pass 0 [ 0.996666] pci_bus 0000:07: scanning bus [ 0.996718] pci 0000:07:00.0: found [1002:954f] class 000300 header type 00 [ 0.996768] pci 0000:07:00.0: calling quirk_no_ata_d3+0x0/0x1b [ 0.996822] pci 0000:07:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.996877] pci 0000:07:00.0: reg 18: [mem 0xfbfe0000-0xfbfeffff 64bit] [ 0.996928] pci 0000:07:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.996981] pci 0000:07:00.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref] [ 0.997031] pci 0000:07:00.0: calling quirk_resource_alignment+0x0/0x19c [ 0.997092] pci 0000:07:00.0: supports D1 D2 [ 0.997152] pci 0000:07:00.1: found [1002:aa38] class 000403 header type 00 [ 0.997202] pci 0000:07:00.1: calling quirk_no_ata_d3+0x0/0x1b [ 0.997256] pci 0000:07:00.1: reg 10: [mem 0xfbffc000-0xfbffffff 64bit] [ 0.997321] pci 0000:07:00.1: calling quirk_resource_alignment+0x0/0x19c [ 0.997382] pci 0000:07:00.1: supports D1 D2 [ 0.997450] pci_bus 0000:07: fixups for bus [ 0.997494] pci 0000:00:03.0: PCI bridge to [bus 07-07] [ 0.997542] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 0.997590] pci 0000:00:03.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.998275] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.998337] pci_bus 0000:07: bus scan returning with max=07 [ 0.998385] pci 0000:00:1c.0: scanning behind bridge, config 060600, pass 0 [ 0.998436] pci_bus 0000:06: scanning bus [ 0.998505] pci_bus 0000:06: fixups for bus [ 0.998550] pci 0000:00:1c.0: PCI bridge to [bus 06-06] [ 0.998603] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.998665] pci_bus 0000:06: bus scan returning with max=06 [ 0.998714] pci 0000:00:1c.1: scanning behind bridge, config 020200, pass 0 [ 0.998765] pci_bus 0000:02: scanning bus [ 0.998825] pci 0000:02:00.0: found [1106:3403] class 000c00 header type 00 [ 0.998876] pci 0000:02:00.0: calling quirk_no_ata_d3+0x0/0x1b [ 0.998937] pci 0000:02:00.0: reg 10: [mem 0xfbdef800-0xfbdeffff 64bit] [ 0.998991] pci 0000:02:00.0: reg 18: [io 0xc000-0xc0ff] [ 0.999063] pci 0000:02:00.0: calling quirk_resource_alignment+0x0/0x19c [ 0.999137] pci 0000:02:00.0: supports D2 [ 0.999181] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold [ 0.999232] pci 0000:02:00.0: PME# disabled [ 0.999306] pci 0000:02:00.1: found [1106:0415] class 000101 header type 00 [ 0.999356] pci 0000:02:00.1: calling quirk_no_ata_d3+0x0/0x1b [ 0.999412] pci 0000:02:00.1: reg 10: [io 0xcc00-0xcc07] [ 0.999464] pci 0000:02:00.1: reg 14: [io 0xc880-0xc883] [ 0.999516] pci 0000:02:00.1: reg 18: [io 0xc800-0xc807] [ 0.999567] pci 0000:02:00.1: reg 1c: [io 0xc480-0xc483] [ 0.999619] pci 0000:02:00.1: reg 20: [io 0xc400-0xc40f] [ 0.999677] pci 0000:02:00.1: reg 30: [mem 0xfbdf0000-0xfbdfffff pref] [ 0.999730] pci 0000:02:00.1: calling quirk_resource_alignment+0x0/0x19c [ 0.999804] pci 0000:02:00.1: supports D2 [ 0.999848] pci 0000:02:00.1: PME# supported from D2 D3hot D3cold [ 0.999898] pci 0000:02:00.1: PME# disabled [ 0.999986] pci_bus 0000:02: fixups for bus [ 1.000031] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.000079] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.000128] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.000180] pci_bus 0000:02: bus scan returning with max=02 [ 1.000228] pci 0000:00:1c.2: scanning behind bridge, config 040400, pass 0 [ 1.000279] pci_bus 0000:04: scanning bus [ 1.000339] pci 0000:04:00.0: found [10ec:8168] class 000200 header type 00 [ 1.000398] pci 0000:04:00.0: reg 10: [io 0xd800-0xd8ff] [ 1.000461] pci 0000:04:00.0: reg 18: [mem 0xcfdff000-0xcfdfffff 64bit pref] [ 1.000521] pci 0000:04:00.0: reg 20: [mem 0xcfdf8000-0xcfdfbfff 64bit pref] [ 1.000575] pci 0000:04:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref] [ 1.000627] pci 0000:04:00.0: calling quirk_resource_alignment+0x0/0x19c [ 1.000706] pci 0000:04:00.0: supports D1 D2 [ 1.000751] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.000802] pci 0000:04:00.0: PME# disabled [ 1.000889] pci_bus 0000:04: fixups for bus [ 1.000934] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 1.000982] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.001031] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.001082] pci 0000:00:1c.2: bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref] [ 1.001144] pci_bus 0000:04: bus scan returning with max=04 [ 1.001192] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 0 [ 1.001243] pci_bus 0000:03: scanning bus [ 1.001313] pci_bus 0000:03: fixups for bus [ 1.001357] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.001410] pci 0000:00:1c.3: bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref] [ 1.001471] pci_bus 0000:03: bus scan returning with max=03 [ 1.001519] pci 0000:00:1c.4: scanning behind bridge, config 050500, pass 0 [ 1.001570] pci_bus 0000:05: scanning bus [ 1.001640] pci_bus 0000:05: fixups for bus [ 1.001684] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 1.001737] pci 0000:00:1c.4: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.001798] pci_bus 0000:05: bus scan returning with max=05 [ 1.001846] pci 0000:00:1e.0: scanning behind bridge, config 010100, pass 0 [ 1.001897] pci_bus 0000:01: scanning bus [ 1.001977] pci_bus 0000:01: fixups for bus [ 1.002021] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 1.002076] pci_bus 0000:01: bus scan returning with max=01 [ 1.002124] pci 0000:00:03.0: scanning behind bridge, config 070700, pass 1 [ 1.002176] pci 0000:00:1c.0: scanning behind bridge, config 060600, pass 1 [ 1.002228] pci 0000:00:1c.1: scanning behind bridge, config 020200, pass 1 [ 1.002280] pci 0000:00:1c.2: scanning behind bridge, config 040400, pass 1 [ 1.002332] pci 0000:00:1c.3: scanning behind bridge, config 030300, pass 1 [ 1.002384] pci 0000:00:1c.4: scanning behind bridge, config 050500, pass 1 [ 1.002436] pci 0000:00:1e.0: scanning behind bridge, config 010100, pass 1 [ 1.002487] pci_bus 0000:00: bus scan returning with max=07 [ 1.002534] pci_bus 0000:00: on NUMA node 0 [ 1.002581] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.002762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 1.002860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 1.002982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 1.003080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 1.003169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 1.003259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 1.009075] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.009507] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 1.009723] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.010224] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.010657] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 1.011152] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 1.011648] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *6 7 10 11 12 14 15) [ 1.012077] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.012533] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.012597] vgaarb: loaded [ 1.012723] SCSI subsystem initialized [ 1.012851] libata version 3.00 loaded. [ 1.012953] usbcore: registered new interface driver usbfs [ 1.013034] usbcore: registered new interface driver hub [ 1.013106] usbcore: registered new device driver usb [ 1.013299] ACPI: WMI: Mapper loaded [ 1.013343] PCI: Using ACPI for IRQ routing [ 1.013388] PCI: pci_cache_line_size set to 64 bytes [ 1.013445] pci 0000:00:1a.0: BAR 0: reserving [mem 0xfbcf6000-0xfbcf63ff flags 0x20200] (d=0, p=0) [ 1.013510] pci 0000:00:1b.0: BAR 0: reserving [mem 0xfbcf8000-0xfbcfbfff flags 0x120204] (d=0, p=0) [ 1.013581] pci 0000:00:1d.0: BAR 0: reserving [mem 0xfbcfc000-0xfbcfc3ff flags 0x20200] (d=0, p=0) [ 1.013649] pci 0000:00:1f.2: BAR 0: reserving [io 0xac00-0xac07 flags 0x20101] (d=0, p=0) [ 1.013712] pci 0000:00:1f.2: BAR 1: reserving [io 0xa880-0xa883 flags 0x20101] (d=0, p=0) [ 1.013774] pci 0000:00:1f.2: BAR 2: reserving [io 0xa800-0xa807 flags 0x20101] (d=0, p=0) [ 1.013837] pci 0000:00:1f.2: BAR 3: reserving [io 0xa480-0xa483 flags 0x20101] (d=0, p=0) [ 1.013900] pci 0000:00:1f.2: BAR 4: reserving [io 0xa400-0xa40f flags 0x20101] (d=0, p=0) [ 1.013963] pci 0000:00:1f.2: BAR 5: reserving [io 0xa080-0xa08f flags 0x20101] (d=0, p=0) [ 1.014027] pci 0000:00:1f.3: BAR 0: reserving [mem 0xfbcffc00-0xfbcffcff flags 0x120204] (d=0, p=0) [ 1.014091] pci 0000:00:1f.3: BAR 4: reserving [io 0x0400-0x041f flags 0x20101] (d=0, p=0) [ 1.014155] pci 0000:00:1f.5: BAR 0: reserving [io 0xbc00-0xbc07 flags 0x20101] (d=0, p=0) [ 1.014218] pci 0000:00:1f.5: BAR 1: reserving [io 0xb880-0xb883 flags 0x20101] (d=0, p=0) [ 1.014280] pci 0000:00:1f.5: BAR 2: reserving [io 0xb800-0xb807 flags 0x20101] (d=0, p=0) [ 1.014343] pci 0000:00:1f.5: BAR 3: reserving [io 0xb480-0xb483 flags 0x20101] (d=0, p=0) [ 1.014406] pci 0000:00:1f.5: BAR 4: reserving [io 0xb400-0xb40f flags 0x20101] (d=0, p=0) [ 1.014469] pci 0000:00:1f.5: BAR 5: reserving [io 0xb080-0xb08f flags 0x20101] (d=0, p=0) [ 1.014533] pci 0000:07:00.0: BAR 0: reserving [mem 0xd0000000-0xdfffffff flags 0x12120c] (d=0, p=0) [ 1.014599] pci 0000:07:00.0: BAR 2: reserving [mem 0xfbfe0000-0xfbfeffff flags 0x120204] (d=0, p=0) [ 1.014663] pci 0000:07:00.0: BAR 4: reserving [io 0xe000-0xe0ff flags 0x20101] (d=0, p=0) [ 1.014727] pci 0000:07:00.1: BAR 0: reserving [mem 0xfbffc000-0xfbffffff flags 0x120204] (d=0, p=0) [ 1.014793] pci 0000:02:00.0: BAR 0: reserving [mem 0xfbdef800-0xfbdeffff flags 0x120204] (d=0, p=0) [ 1.014857] pci 0000:02:00.0: BAR 2: reserving [io 0xc000-0xc0ff flags 0x20101] (d=0, p=0) [ 1.014921] pci 0000:02:00.1: BAR 0: reserving [io 0xcc00-0xcc07 flags 0x20101] (d=0, p=0) [ 1.014984] pci 0000:02:00.1: BAR 1: reserving [io 0xc880-0xc883 flags 0x20101] (d=0, p=0) [ 1.015047] pci 0000:02:00.1: BAR 2: reserving [io 0xc800-0xc807 flags 0x20101] (d=0, p=0) [ 1.015110] pci 0000:02:00.1: BAR 3: reserving [io 0xc480-0xc483 flags 0x20101] (d=0, p=0) [ 1.015172] pci 0000:02:00.1: BAR 4: reserving [io 0xc400-0xc40f flags 0x20101] (d=0, p=0) [ 1.015237] pci 0000:04:00.0: BAR 0: reserving [io 0xd800-0xd8ff flags 0x20101] (d=0, p=0) [ 1.015300] pci 0000:04:00.0: BAR 2: reserving [mem 0xcfdff000-0xcfdfffff flags 0x12120c] (d=0, p=0) [ 1.015364] pci 0000:04:00.0: BAR 4: reserving [mem 0xcfdf8000-0xcfdfbfff flags 0x12120c] (d=0, p=0) [ 1.015527] NetLabel: Initializing [ 1.015570] NetLabel: domain hash size = 128 [ 1.015614] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.015667] NetLabel: unlabeled traffic allowed by default [ 1.015725] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 1.015779] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 1.016065] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.022478] hpet: hpet2 irq 24 for MSI [ 1.022608] hpet: hpet3 irq 25 for MSI [ 1.026599] hpet: hpet4 irq 26 for MSI [ 1.030566] hpet: hpet5 irq 27 for MSI [ 1.034550] hpet: hpet6 irq 28 for MSI [ 1.042536] Switching to clocksource tsc [ 1.043666] Slow work thread pool: Starting up [ 1.043735] Slow work thread pool: Ready [ 1.043784] FS-Cache: Loaded [ 1.043856] CacheFiles: Loaded [ 1.043902] pnp: PnP ACPI init [ 1.043948] ACPI: bus type pnp registered [ 1.047805] pnp: PnP ACPI: found 16 devices [ 1.047851] ACPI: ACPI bus type pnp unregistered [ 1.047901] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.047950] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.047999] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.048047] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 1.048099] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.048147] system 00:08: [io 0x0800-0x087f] has been reserved [ 1.048194] system 00:08: [io 0x0500-0x057f] has been reserved [ 1.048242] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.048291] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.048340] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved [ 1.048390] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.048439] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.048490] system 00:0d: [io 0x0290-0x029f] has been reserved [ 1.048539] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved [ 1.048589] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.048638] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved [ 1.048687] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.048736] system 00:0f: [mem 0x00100000-0xc7ffffff] could not be reserved [ 1.048785] system 00:0f: [mem 0xfed90000-0xffffffff] could not be reserved [ 1.053579] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc8000000-0xc83fffff] [ 1.053628] pci 0000:00:1c.4: BAR 8: assigned [mem 0xc8400000-0xc87fffff] [ 1.053677] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.053725] pci 0000:00:1c.4: BAR 7: assigned [io 0x2000-0x2fff] [ 1.053773] pci 0000:00:03.0: PCI bridge to [bus 07-07] [ 1.053820] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 1.053869] pci 0000:00:03.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 1.053919] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.053983] pci 0000:00:1c.0: PCI bridge to [bus 06-06] [ 1.054030] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.054080] pci 0000:00:1c.0: bridge window [mem 0xc8000000-0xc83fffff] [ 1.054130] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 1.054195] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.054241] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.054291] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.054342] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 1.054392] pci 0000:00:1c.2: PCI bridge to [bus 04-04] [ 1.054439] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.054489] pci 0000:00:1c.2: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.054539] pci 0000:00:1c.2: bridge window [mem 0xcfd00000-0xcfdfffff 64bit pref] [ 1.054603] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.054655] pci 0000:00:1c.3: bridge window [io disabled] [ 1.054704] pci 0000:00:1c.3: bridge window [mem disabled] [ 1.054753] pci 0000:00:1c.3: bridge window [mem 0xcfc00000-0xcfcfffff 64bit pref] [ 1.054817] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 1.054864] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 1.054914] pci 0000:00:1c.4: bridge window [mem 0xc8400000-0xc87fffff] [ 1.054964] pci 0000:00:1c.4: bridge window [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.055029] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 1.055075] pci 0000:00:1e.0: bridge window [io disabled] [ 1.055124] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.055172] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.055229] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.055279] pci 0000:00:03.0: setting latency timer to 64 [ 1.055330] pci 0000:00:1c.0: enabling device (0102 -> 0103) [ 1.055379] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.055429] pci 0000:00:1c.0: enabling bus mastering [ 1.055476] pci 0000:00:1c.0: setting latency timer to 64 [ 1.055527] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.055576] pci 0000:00:1c.1: setting latency timer to 64 [ 1.055628] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.055678] pci 0000:00:1c.2: setting latency timer to 64 [ 1.055731] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.055780] pci 0000:00:1c.3: enabling bus mastering [ 1.055827] pci 0000:00:1c.3: setting latency timer to 64 [ 1.055877] pci 0000:00:1c.4: enabling device (0102 -> 0103) [ 1.055925] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.055974] pci 0000:00:1c.4: enabling bus mastering [ 1.056022] pci 0000:00:1c.4: setting latency timer to 64 [ 1.056071] pci 0000:00:1e.0: setting latency timer to 64 [ 1.056119] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.056166] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 1.056215] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 1.056261] pci_bus 0000:07: resource 1 [mem 0xfbf00000-0xfbffffff] [ 1.056309] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.056370] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 1.056417] pci_bus 0000:06: resource 1 [mem 0xc8000000-0xc83fffff] [ 1.056465] pci_bus 0000:06: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 1.056526] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff] [ 1.056572] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 1.056620] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 1.056667] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.056715] pci_bus 0000:04: resource 2 [mem 0xcfd00000-0xcfdfffff 64bit pref] [ 1.056776] pci_bus 0000:03: resource 2 [mem 0xcfc00000-0xcfcfffff 64bit pref] [ 1.056836] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] [ 1.056883] pci_bus 0000:05: resource 1 [mem 0xc8400000-0xc87fffff] [ 1.056931] pci_bus 0000:05: resource 2 [mem 0xcfe00000-0xcfefffff 64bit pref] [ 1.056992] pci_bus 0000:01: resource 3 [io 0x0000-0xffff] [ 1.057039] pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffffffffffff] [ 1.057101] NET: Registered protocol family 2 [ 1.057174] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.057480] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.058688] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.059002] TCP: Hash tables configured (established 262144 bind 65536) [ 1.059051] TCP reno registered [ 1.059095] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 1.059190] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 1.059334] NET: Registered protocol family 1 [ 1.059387] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.059437] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.059487] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.059536] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xbc [ 1.059585] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.059634] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.059682] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.059731] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xbc [ 1.059780] pci 0000:00:08.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.059828] pci 0000:00:08.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.059877] pci 0000:00:08.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.059926] pci 0000:00:08.0: calling pci_fixup_video+0x0/0xbc [ 1.059974] pci 0000:00:08.1: calling quirk_e100_interrupt+0x0/0x192 [ 1.060023] pci 0000:00:08.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060071] pci 0000:00:08.1: calling quirk_usb_early_handoff+0x0/0x595 [ 1.060120] pci 0000:00:08.1: calling pci_fixup_video+0x0/0xbc [ 1.060169] pci 0000:00:08.2: calling quirk_e100_interrupt+0x0/0x192 [ 1.060217] pci 0000:00:08.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060266] pci 0000:00:08.2: calling quirk_usb_early_handoff+0x0/0x595 [ 1.060314] pci 0000:00:08.2: calling pci_fixup_video+0x0/0xbc [ 1.060363] pci 0000:00:08.3: calling quirk_e100_interrupt+0x0/0x192 [ 1.060411] pci 0000:00:08.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060460] pci 0000:00:08.3: calling quirk_usb_early_handoff+0x0/0x595 [ 1.060509] pci 0000:00:08.3: calling pci_fixup_video+0x0/0xbc [ 1.060557] pci 0000:00:10.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.060606] pci 0000:00:10.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060654] pci 0000:00:10.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.060703] pci 0000:00:10.0: calling pci_fixup_video+0x0/0xbc [ 1.060752] pci 0000:00:10.1: calling quirk_e100_interrupt+0x0/0x192 [ 1.060800] pci 0000:00:10.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.060849] pci 0000:00:10.1: calling quirk_usb_early_handoff+0x0/0x595 [ 1.060898] pci 0000:00:10.1: calling pci_fixup_video+0x0/0xbc [ 1.060946] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.060995] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061043] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.061108] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xbc [ 1.061157] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.061205] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061254] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.061303] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xbc [ 1.061352] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.061400] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061448] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.061497] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xbc [ 1.061546] pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x192 [ 1.061595] pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061643] pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x595 [ 1.061692] pci 0000:00:1c.1: calling pci_fixup_video+0x0/0xbc [ 1.061741] pci 0000:00:1c.2: calling quirk_e100_interrupt+0x0/0x192 [ 1.061789] pci 0000:00:1c.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.061838] pci 0000:00:1c.2: calling quirk_usb_early_handoff+0x0/0x595 [ 1.061887] pci 0000:00:1c.2: calling pci_fixup_video+0x0/0xbc [ 1.061936] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x192 [ 1.061984] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.062032] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x595 [ 1.062081] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xbc [ 1.062130] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x192 [ 1.062816] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30 [ 1.062864] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x595 [ 1.062913] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xbc [ 1.062962] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.063011] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.063059] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.063121] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xbc [ 1.063170] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.063218] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.063267] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.063316] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xbc [ 1.063365] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x192 [ 1.063413] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.063461] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.063510] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xbc [ 1.063560] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x192 [ 1.063608] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 [ 1.063656] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x595 [ 1.063705] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xbc [ 1.063754] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x192 [ 1.063802] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 [ 1.063851] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x595 [ 1.063900] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xbc [ 1.063949] pci 0000:00:1f.5: calling quirk_e100_interrupt+0x0/0x192 [ 1.063997] pci 0000:00:1f.5: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064046] pci 0000:00:1f.5: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064094] pci 0000:00:1f.5: calling pci_fixup_video+0x0/0xbc [ 1.064143] pci 0000:07:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064192] pci 0000:07:00.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064241] pci 0000:07:00.0: calling pci_fixup_video+0x0/0xbc [ 1.064289] pci 0000:07:00.0: Boot video device [ 1.064336] pci 0000:07:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064384] pci 0000:07:00.1: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064433] pci 0000:07:00.1: calling pci_fixup_video+0x0/0xbc [ 1.064482] pci 0000:02:00.0: calling via_no_dac+0x0/0x53 [ 1.064529] pci 0000:02:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064577] pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064626] pci 0000:02:00.0: calling pci_fixup_video+0x0/0xbc [ 1.064675] pci 0000:02:00.1: calling via_no_dac+0x0/0x53 [ 1.064722] pci 0000:02:00.1: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064771] pci 0000:02:00.1: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064819] pci 0000:02:00.1: calling pci_fixup_video+0x0/0xbc [ 1.064869] pci 0000:04:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 1.064917] pci 0000:04:00.0: calling quirk_usb_early_handoff+0x0/0x595 [ 1.064966] pci 0000:04:00.0: calling pci_fixup_video+0x0/0xbc [ 1.065015] PCI: CLS 32 bytes, default 64 [ 1.065091] Unpacking initramfs... [ 1.211409] Freeing initrd memory: 9811k freed [ 1.212687] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.212738] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 1.212800] software IO TLB at phys 0x20000000 - 0x24000000 [ 1.214420] cpu0(8) debug files 193 [ 1.215101] cpu1(8) debug files 193 [ 1.215785] cpu2(8) debug files 193 [ 1.216463] cpu3(8) debug files 193 [ 1.216868] cpu4(8) debug files 193 [ 1.217623] cpu5(8) debug files 193 [ 1.218303] cpu6(8) debug files 193 [ 1.218991] cpu7(8) debug files 193 [ 1.219671] Scanning for low memory corruption every 60 seconds [ 1.229886] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.232213] msgmni has been set to 15959 [ 1.232414] alg: No test for cipher_null (cipher_null-generic) [ 1.232475] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 1.232535] alg: No test for digest_null (digest_null-generic) [ 1.232594] alg: No test for compress_null (compress_null-generic) [ 1.233043] alg: No test for stdrng (krng) [ 1.236855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.236917] io scheduler noop registered [ 1.236961] io scheduler deadline registered (default) [ 1.237071] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.237142] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X [ 1.237257] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.237332] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X [ 1.237452] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.237527] pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X [ 1.237629] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.237704] pcieport 0000:00:1c.2: irq 32 for MSI/MSI-X [ 1.237804] pcieport 0000:00:1c.3: setting latency timer to 64 [ 1.237879] pcieport 0000:00:1c.3: irq 33 for MSI/MSI-X [ 1.237983] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.238058] pcieport 0000:00:1c.4: irq 34 for MSI/MSI-X [ 1.238197] Firmware did not grant requested _OSC control [ 1.238244] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.243856] lp: driver loaded but no devices found [ 1.244046] Non-volatile memory driver v1.3 [ 1.244666] ppdev: user-space parallel port driver [ 1.244713] Linux agpgart interface v0.103 [ 1.244758] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). [ 1.244821] Hangcheck: Using get_cycles(). [ 1.244918] [drm] Initialized drm 1.1.0 20060810 [ 1.244984] [drm] radeon defaulting to kernel modesetting. [ 1.245031] [drm] radeon kernel modesetting enabled. [ 1.245099] radeon 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.245150] radeon 0000:07:00.0: setting latency timer to 64 [ 1.246561] [drm] radeon: Initializing kernel modesetting. [ 1.246686] radeon 0000:07:00.0: using 40bit DMA mask [ 1.246741] [drm] register mmio base: 0xFBFE0000 [ 1.246786] [drm] register mmio size: 65536 [ 1.246857] ATOM BIOS: [ 1.246905] [drm] Clocks initialized ! [ 1.246959] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 1.247021] [drm] Detected VRAM RAM=256M, BAR=256M [ 1.247066] [drm] RAM width 64bits DDR [ 1.247130] [TTM] Zone kernel: Available graphics memory: 4085586 kiB. [ 1.247178] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.247233] [drm] radeon: 256M of VRAM memory ready [ 1.247284] [drm] radeon: 512M of GTT memory ready. [ 1.247359] radeon 0000:07:00.0: irq 35 for MSI/MSI-X [ 1.247407] [drm] radeon: using MSI. [ 1.247464] [drm] radeon: irq initialized. [ 1.247509] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.247811] [drm] Loading RV710 Microcode [ 1.247857] platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_pfp.bin [ 1.247919] platform radeon_cp.0: firmware: using built-in firmware radeon/RV710_me.bin [ 1.247984] platform radeon_cp.0: firmware: using built-in firmware radeon/R700_rlc.bin [ 1.295325] [drm] ring test succeeded in 1 usecs [ 1.295424] [drm] radeon: ib pool ready. [ 1.295512] [drm] ib test succeeded in 0 usecs [ 1.295764] [drm] Radeon Display Connectors [ 1.295808] [drm] Connector 0: [ 1.295851] [drm] VGA [ 1.295893] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 1.295953] [drm] Encoders: [ 1.295996] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 1.296041] [drm] Connector 1: [ 1.296083] [drm] HDMI-A [ 1.296125] [drm] HPD1 [ 1.296167] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 1.296227] [drm] Encoders: [ 1.296269] [drm] DFP1: INTERNAL_UNIPHY [ 1.296314] [drm] Connector 2: [ 1.296356] [drm] DVI-I [ 1.296398] [drm] HPD4 [ 1.296440] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c [ 1.296500] [drm] Encoders: [ 1.296542] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.296587] [drm] DFP2: INTERNAL_UNIPHY2 [ 1.441066] [drm] fb mappable at 0xD0141000 [ 1.441111] [drm] vram apper at 0xD0000000 [ 1.441155] [drm] size 8294400 [ 1.441197] [drm] fb depth is 24 [ 1.441240] [drm] pitch is 7680 [ 1.441907] executing set pll [ 1.441918] executing set crtc timing [ 1.441949] [drm] TMDS-15: set mode 1920x1080 1e [ 1.491639] Console: switching to colour frame buffer device 240x67 [ 1.495934] fb0: radeondrmfb frame buffer device [ 1.495953] registered panic notifier [ 1.495970] [drm] Initialized radeon 2.0.0 20080528 for 0000:07:00.0 on minor 0 [ 1.496034] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.496162] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.496287] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.496629] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.497014] parport_pc 00:07: reported by Plug and Play ACPI [ 1.497087] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 1.593628] lp0: using parport0 (interrupt-driven). [ 1.594349] loop: module loaded [ 1.594561] ata_piix 0000:00:1f.2: version 2.13 [ 1.594590] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.594618] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.594677] ata_piix 0000:00:1f.2: using 32bit DMA mask [ 1.594698] ata_piix 0000:00:1f.2: using 32bit consistent DMA mask [ 1.594734] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.594795] scsi0 : ata_piix [ 1.594879] scsi1 : ata_piix [ 1.595939] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19 [ 1.595970] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19 [ 1.596018] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.596056] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.596112] ata_piix 0000:00:1f.5: using 32bit DMA mask [ 1.596133] ata_piix 0000:00:1f.5: using 32bit consistent DMA mask [ 1.596167] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.596219] scsi2 : ata_piix [ 1.596297] scsi3 : ata_piix [ 1.597161] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19 [ 1.597190] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19 [ 1.597255] pata_via 0000:02:00.1: version 0.3.4 [ 1.597291] pata_via 0000:02:00.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.597320] pata_via 0000:02:00.1: calling quirk_via_vlink+0x0/0xe0 [ 1.597361] pata_via 0000:02:00.1: using 32bit DMA mask [ 1.597381] pata_via 0000:02:00.1: using 32bit consistent DMA mask [ 1.597411] pata_via 0000:02:00.1: setting latency timer to 64 [ 1.597477] scsi4 : pata_via [ 1.597553] scsi5 : pata_via [ 1.597741] ata5: PATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 [ 1.598667] ata6: PATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 [ 1.599785] tun: Universal TUN/TAP device driver, 1.6 [ 1.600815] tun: (C) 1999-2004 Max Krasnyansky [ 1.601838] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.602847] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.603880] r8169 0000:04:00.0: enabling Mem-Wr-Inval [ 1.604933] r8169 0000:04:00.0: using 64bit DMA mask [ 1.605994] r8169 0000:04:00.0: using 32bit DMA mask [ 1.607087] r8169 0000:04:00.0: setting latency timer to 64 [ 1.608221] r8169 0000:04:00.0: irq 36 for MSI/MSI-X [ 1.609453] eth0: RTL8168d/8111d at 0xffffc9000005c000, 00:25:22:03:d1:c2, XID 081000c0 IRQ 36 [ 1.653196] netconsole: local port 4444 [ 1.654355] netconsole: local IP 192.168.66.33 [ 1.655531] netconsole: interface eth0 [ 1.656710] netconsole: remote port 514 [ 1.657897] netconsole: remote IP 192.168.66.25 [ 1.659099] netconsole: remote ethernet address 00:a0:d1:63:68:a6 [ 1.660318] netconsole: device eth0 not up yet, forcing it [ 1.661659] r8169: eth0: link down [ 1.662923] r8169: eth0: link down [ 1.923594] ata3: SATA link down (SStatus 0 SControl 300) [ 1.934201] ata4: SATA link down (SStatus 0 SControl 300) [ 2.391999] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.393250] ata2.01: SATA link down (SStatus 0 SControl 300) [ 2.394489] ata2.01: link offline, clearing class 3 to NONE [ 2.400121] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223C, SB01, max UDMA/100 [ 2.416097] ata2.00: configured for UDMA/100 [ 2.511753] ata1.00: SATA link down (SStatus 0 SControl 300) [ 2.512987] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.532041] ata1.01: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 2.533283] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.548017] ata1.01: configured for UDMA/133 [ 2.549298] scsi 0:0:1:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 2.550686] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.550715] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 2.553253] sd 0:0:1:0: [sda] Write Protect is off [ 2.553293] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223C SB01 PQ: 0 ANSI: 5 [ 2.555811] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.557137] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.558622] sda:sr0: scsi3-mmc drive: 52x/52x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.561786] Uniform CD-ROM driver Revision: 3.20 [ 2.563193] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.564571] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.565928] sda1 sda2 sda3 [ 2.567487] sd 0:0:1:0: [sda] Attached SCSI disk [ 3.191107] r8169: eth0: link up [ 4.241300] console [netcon0] enabled [ 4.242646] netconsole: network logging started [ 4.244005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.245380] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 4.246775] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.248158] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.249601] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 4.250968] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.252346] ehci_hcd 0000:00:1a.0: reset hcs_params 0x203006 dbg=2 cc=3 pcc=0 ordered !ppc ports=6 [ 4.253724] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 4.255122] ehci_hcd 0000:00:1a.0: debug port 2 [ 4.256516] ehci_hcd 0000:00:1a.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.261828] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 4.263239] ehci_hcd 0000:00:1a.0: supports USB remote wakeup [ 4.264675] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbcf6000 [ 4.266149] ehci_hcd 0000:00:1a.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.271451] ehci_hcd 0000:00:1a.0: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.284082] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 4.285503] usb usb1: default language 0x0409 [ 4.286904] usb usb1: udev 1, busnum 1, minor = 0 [ 4.288299] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.289695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.291097] usb usb1: Product: EHCI Host Controller [ 4.292508] usb usb1: Manufacturer: Linux 2.6.33-rc2-major ehci_hcd [ 4.293917] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.295345] usb usb1: uevent [ 4.296756] usb usb1: usb_probe_device [ 4.298190] usb usb1: configuration #1 chosen from 1 choice [ 4.299574] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 4.300976] usb 1-0:1.0: uevent [ 4.302388] hub 1-0:1.0: usb_probe_interface [ 4.303783] hub 1-0:1.0: usb_probe_interface - got id [ 4.305184] hub 1-0:1.0: USB hub found [ 4.306571] hub 1-0:1.0: 6 ports detected [ 4.307940] hub 1-0:1.0: standalone hub [ 4.309319] hub 1-0:1.0: no power switching (usb 1.0) [ 4.310690] hub 1-0:1.0: individual port over-current protection [ 4.312078] hub 1-0:1.0: power on to power good time: 20ms [ 4.313530] hub 1-0:1.0: local power source is good [ 4.314909] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 4.316372] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.317771] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 4.319157] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 4.320542] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 4.321929] ehci_hcd 0000:00:1d.0: reset hcs_params 0x204008 dbg=2 cc=4 pcc=0 ordered !ppc ports=8 [ 4.323329] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 4.324745] ehci_hcd 0000:00:1d.0: debug port 2 [ 4.326136] ehci_hcd 0000:00:1d.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.331499] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 4.332891] ehci_hcd 0000:00:1d.0: supports USB remote wakeup [ 4.334280] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbcfc000 [ 4.335656] ehci_hcd 0000:00:1d.0: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 4.340898] ehci_hcd 0000:00:1d.0: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 4.351945] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 4.353289] usb usb2: default language 0x0409 [ 4.354605] usb usb2: udev 1, busnum 2, minor = 128 [ 4.355912] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.357241] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.358564] usb usb2: Product: EHCI Host Controller [ 4.359879] usb usb2: Manufacturer: Linux 2.6.33-rc2-major ehci_hcd [ 4.361200] usb usb2: SerialNumber: 0000:00:1d.0 [ 4.362530] usb usb2: uevent [ 4.363934] usb usb2: usb_probe_device [ 4.365227] usb usb2: configuration #1 chosen from 1 choice [ 4.366525] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 4.367828] usb 2-0:1.0: uevent [ 4.369144] hub 2-0:1.0: usb_probe_interface [ 4.370394] hub 2-0:1.0: usb_probe_interface - got id [ 4.371638] hub 2-0:1.0: USB hub found [ 4.372880] hub 2-0:1.0: 8 ports detected [ 4.374098] hub 2-0:1.0: standalone hub [ 4.375306] hub 2-0:1.0: no power switching (usb 1.0) [ 4.376504] hub 2-0:1.0: individual port over-current protection [ 4.377689] hub 2-0:1.0: power on to power good time: 20ms [ 4.378946] hub 2-0:1.0: local power source is good [ 4.380135] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 4.381431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.382666] ohci_hcd: block sizes: ed 80 td 96 [ 4.383936] uhci_hcd: USB Universal Host Controller Interface driver [ 4.385248] Initializing USB Mass Storage driver... [ 4.386518] usbcore: registered new interface driver usb-storage [ 4.387730] USB Mass Storage support registered. [ 4.388976] usbcore: registered new interface driver libusual [ 4.390281] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 4.391520] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 4.393539] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.395052] mice: PS/2 mouse device common for all mice [ 4.396506] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 4.397821] rtc_cmos 00:03: RTC can wake from S4 [ 4.399165] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.400505] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.402104] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 4.403492] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 4.404839] i2c /dev entries driver [ 4.406352] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.407861] coretemp coretemp.0: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.407961] coretemp coretemp.1: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.409426] coretemp coretemp.2: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.410949] coretemp coretemp.3: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.412387] coretemp coretemp.4: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.413808] coretemp coretemp.5: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.415215] coretemp coretemp.6: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.416555] ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 4.416771] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 4.417405] coretemp coretemp.7: Unable to access MSR 0xEE, for Tjmax, left at default [ 4.417582] device-mapper: uevent: version 1.0.3 [ 4.417713] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com [ 4.417785] cpuidle: using governor ladder [ 4.417787] cpuidle: using governor menu [ 4.418743] usbcore: registered new interface driver usbhid [ 4.418744] usbhid: USB HID core driver [ 4.418834] oprofile: using NMI interrupt. [ 4.418863] NET: Registered protocol family 26 [ 4.419106] TCP cubic registered [ 4.419107] NET: Registered protocol family 17 [ 4.439247] hub 1-0:1.0: port 1: status 0501 change 0001 [ 4.442602] registered taskstats version 1 [ 4.444215] rtc_cmos 00:03: setting system clock to 2009-12-27 17:09:48 UTC (1261933788) [ 4.445528] Freeing unused kernel memory: 452k freed [ 4.446870] Write protecting the kernel read-only data: 10240k [ 4.448288] Freeing unused kernel memory: 1040k freed [ 4.449776] Freeing unused kernel memory: 1704k freed [ 4.467624] usb usb1: uevent [ 4.469206] usb 1-0:1.0: uevent [ 4.471182] usb usb2: uevent [ 4.472758] usb 2-0:1.0: uevent [ 4.474674] usb usb1: uevent [ 4.477386] usb usb2: uevent [ 4.483690] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT [ 4.485340] hub 2-0:1.0: port 1: status 0501 change 0001 [ 4.543561] hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000 [ 4.544876] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 4.599722] ehci_hcd 0000:00:1a.0: port 1 high speed [ 4.601031] ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 4.656584] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 4.664423] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.712755] ehci_hcd 0000:00:1a.0: port 1 high speed [ 4.714156] ehci_hcd 0000:00:1a.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 4.791361] usb 1-1: udev 2, busnum 1, minor = 1 [ 4.792704] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 4.794120] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.795493] usb 1-1: uevent [ 4.796837] usb 1-1: usb_probe_device [ 4.798149] usb 1-1: configuration #1 chosen from 1 choice [ 4.799595] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 4.800909] usb 1-1:1.0: uevent [ 4.802202] hub 1-1:1.0: usb_probe_interface [ 4.803488] hub 1-1:1.0: usb_probe_interface - got id [ 4.804768] hub 1-1:1.0: USB hub found [ 4.806081] hub 1-1:1.0: 6 ports detected [ 4.807340] hub 1-1:1.0: standalone hub [ 4.808596] hub 1-1:1.0: individual port power switching [ 4.809912] hub 1-1:1.0: individual port over-current protection [ 4.811135] hub 1-1:1.0: Single TT [ 4.812344] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 4.813576] hub 1-1:1.0: Port indicators are supported [ 4.814820] hub 1-1:1.0: power on to power good time: 100ms [ 4.816311] hub 1-1:1.0: local power source is good [ 4.817571] hub 1-1:1.0: enabling power on all ports [ 4.819576] hub 2-0:1.0: state 7 ports 8 chg 0002 evt 0000 [ 4.820869] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 4.875068] ehci_hcd 0000:00:1d.0: port 1 high speed [ 4.876354] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 4.919491] usb 1-1: link qh256-0001/ffff880234841200 start 1 [1/0 us] [ 4.930768] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 4.986853] ehci_hcd 0000:00:1d.0: port 1 high speed [ 4.988108] ehci_hcd 0000:00:1d.0: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT [ 5.062840] usb 2-1: udev 2, busnum 2, minor = 129 [ 5.064137] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.065512] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.066854] usb 2-1: uevent [ 5.068165] usb 2-1: usb_probe_device [ 5.069462] usb 2-1: configuration #1 chosen from 1 choice [ 5.070825] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 5.072141] usb 2-1:1.0: uevent [ 5.073447] hub 2-1:1.0: usb_probe_interface [ 5.074740] hub 2-1:1.0: usb_probe_interface - got id [ 5.076020] hub 2-1:1.0: USB hub found [ 5.077311] hub 2-1:1.0: 8 ports detected [ 5.078542] hub 2-1:1.0: standalone hub [ 5.079780] hub 2-1:1.0: individual port power switching [ 5.081091] hub 2-1:1.0: individual port over-current protection [ 5.082325] hub 2-1:1.0: Single TT [ 5.083564] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 5.084830] hub 2-1:1.0: Port indicators are supported [ 5.086104] hub 2-1:1.0: power on to power good time: 100ms [ 5.087664] hub 2-1:1.0: local power source is good [ 5.088974] hub 2-1:1.0: enabling power on all ports [ 5.091180] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0000 [ 5.192089] hub 2-1:1.0: port 5: status 0101 change 0001 [ 5.193711] hub 2-1:1.0: port 6: status 0101 change 0001 [ 5.295276] usb 2-1: link qh256-0001/ffff880234841180 start 1 [1/0 us] [ 5.296562] hub 2-1:1.0: state 7 ports 8 chg 0060 evt 0000 [ 5.297889] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 5.370000] usb 2-1.5: new high speed USB device using ehci_hcd and address 3 [ 5.463070] usb 2-1.5: default language 0x0409 [ 5.465566] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 5.466825] usb 2-1.5: New USB device found, idVendor=0951, idProduct=1624 [ 5.468080] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.469331] usb 2-1.5: Product: DataTraveler G2 [ 5.470578] usb 2-1.5: Manufacturer: Kingston [ 5.471809] usb 2-1.5: SerialNumber: 0019E0009E7EA931251702CA [ 5.473078] usb 2-1.5: uevent [ 5.474311] usb 2-1.5: usb_probe_device [ 5.475533] usb 2-1.5: configuration #1 chosen from 1 choice [ 5.476922] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 5.478146] usb 2-1.5:1.0: uevent [ 5.479372] usb-storage 2-1.5:1.0: usb_probe_interface [ 5.480668] usb-storage 2-1.5:1.0: usb_probe_interface - got id [ 5.481927] scsi6 : usb-storage 2-1.5:1.0 [ 5.483285] hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 5.554899] usb 2-1.6: new low speed USB device using ehci_hcd and address 4 [ 5.649465] usb 2-1.6: skipped 1 descriptor after interface [ 5.651335] usb 2-1.6: default language 0x0409 [ 5.653955] usb 2-1.6: udev 4, busnum 2, minor = 131 [ 5.655295] usb 2-1.6: New USB device found, idVendor=04f3, idProduct=0212 [ 5.656573] usb 2-1.6: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.657850] usb 2-1.6: Product: PS/2+USB Mouse [ 5.659157] usb 2-1.6: uevent [ 5.660427] usb 2-1.6: usb_probe_device [ 5.661684] usb 2-1.6: configuration #1 chosen from 1 choice [ 5.663190] usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0) [ 5.664453] usb 2-1.6:1.0: uevent [ 5.665703] usbhid 2-1.6:1.0: usb_probe_interface [ 5.666937] usbhid 2-1.6:1.0: usb_probe_interface - got id [ 5.670515] input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input1 [ 5.671844] generic-usb 0003:04F3:0212.0001: input: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1.6/input0 [ 5.673101] hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0040 [ 6.407370] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k [ 7.020198] udev: starting version 149 [ 7.054968] usb usb1: uevent [ 7.056489] usb 1-0:1.0: uevent [ 7.057894] usb 1-1: uevent [ 7.059342] usb 1-1:1.0: uevent [ 7.061021] usb usb2: uevent [ 7.062506] usb 2-0:1.0: uevent [ 7.063869] usb 2-1: uevent [ 7.065233] usb 2-1.5: uevent [ 7.066582] usb 2-1.5:1.0: uevent [ 7.067948] usb 2-1.6: uevent [ 7.069274] usb 2-1.6:1.0: uevent [ 7.070654] usb 2-1:1.0: uevent [ 7.086696] usb usb1: uevent [ 7.086741] usb usb2: uevent [ 7.088094] usb 2-1: uevent [ 7.089360] usb 2-1.5: uevent [ 7.089770] usb 2-1.6: uevent [ 7.094363] usb 1-1: uevent [ 7.506239] usb 2-1.6:1.0: uevent [ 7.507874] usb 2-1.6: uevent [ 7.511485] usb 2-1.6:1.0: uevent [ 7.512815] usb 2-1.6: uevent [ 7.560009] usb 2-1.6:1.0: uevent [ 7.560012] usb 2-1.6:1.0: uevent [ 8.701963] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.703289] HDA Intel 0000:00:1b.0: irq 37 for MSI/MSI-X [ 8.704458] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.705617] HDA Intel 0000:00:1b.0: using 64bit DMA mask [ 8.706773] HDA Intel 0000:00:1b.0: using 64bit consistent DMA mask [ 8.819004] HDA Intel 0000:07:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.820217] HDA Intel 0000:07:00.1: irq 38 for MSI/MSI-X [ 8.821382] HDA Intel 0000:07:00.1: setting latency timer to 64 [ 8.822526] HDA Intel 0000:07:00.1: using 64bit DMA mask [ 8.823673] HDA Intel 0000:07:00.1: using 64bit consistent DMA mask